2014 Aluminom efere

2014 aluminom efere bụ akụkụ anọ na-edozi site na-atụgharị aluminum ingots. Ngwakọta alloy nke 2014 bụ ọla kọpa, nke a na-akpọ hard molybdenum.

2014 aluminom efere nwere ike dị elu na ịrụ ọrụ nke ọma, ma ọ nwere nguzogide corrosion na-adịghị mma. A na-eji ya eme ihe na rivets nke ihe owuwu ụgbọ elu (akpụkpọ ahụ, etiti, ọgịrịga, nnukwu isi, wdg), ihe ngwa agha, ebe ụgbọ ala, ihe ndị na-ebupụta ihe na akụkụ ndị ọzọ.

Iwe:2014-O, 2014-T4, 2024-T6, 2024-T651, 2014-T3 Clad, 2014-T4 Clad, 2014-T6 mkpuchi.

iferi:AMS 4028, AMS 4029, EN 2089, EN 2395, BS L156, BS L157, BS L158, DTD 5010

AlClad:AMS QQ-A-250/3, EN 2087, EN 2088, BS L163, BS L164, BS L165, DTD 5030, DTD 5040

Nkọwa nke 2014 aluminom efere

Ngwakọta kemịkalụ

• Isi alloying element na 2014 aluminum efere bụ ọla kọpa, na a ọla kọpa ọdịnaya n'ozuzu gburugburu 3.9% - 5.0%.
• O nwekwara ihe ndị ọzọ dị ka silicon (0.5% - 1.2%), manganese (0.4% - 1.2%), magnesium (0.2% - 0.8%) na obere ígwè, zinc, titanium, wdg. Ihe ndị a na-arụ ọrụ dị iche iche n'ịkwalite arụmọrụ nke alloy.

Ihe eji arụ ọrụ

• Ike dị elu: N'ihi mgbakwunye nke ọla kọpa na ihe ndị ọzọ, 2014 aluminum plate nwere ike dị elu n'etiti aluminum alloys. Ike ike ya nwere ike iru 400MPa - 500MPa ma ọ bụ ọbụna karịa mgbe ọgwụgwọ okpomọkụ kwesịrị ekwesị na nhazi, nke na-enyere ya aka iguzogide nnukwu ndị agha mpụga.
• Ezi Ike: Ọ nwekwara ike siri ike, nke pụtara na ọ nwere ike iguzogide mgbawa na imebi n'okpuru mmetụta nke mmetụta na ịma jijiji ruo n'ókè ụfọdụ, ma nwee ntụkwasị obi dị mma na ngwa ndị bara uru.
• Machinability dị mma: 2014 aluminum efere nwere ezi machinability na ike mfe hazie n'ime dị iche iche shapes na nha site na usoro dị ka ịcha, egwe ọka, mkpọ ala na forging, nke dị mma maka n'ichepụta dị iche iche nkenke akụkụ.

Ngwa

• Ụlọ ọrụ Aerospace: A na-eji ya eme ihe n'ọtụtụ ebe n'ichepụta ihe nhazi ụgbọ elu, dị ka nku, fuselages, ngwa ọdịda na akụkụ ndị ọzọ. Ike ya dị elu na njirimara dị arọ nwere ike inye aka belata ibu nke ụgbọ elu ma melite arụmọrụ ụgbọ elu na mmanụ ụgbọala.
• Ụlọ ọrụ ụgbọ ala: N'ime ụgbọ ala ụgbọ ala, a na-eji 2014 aluminom efere eme ihe ụfọdụ isi ihe, dị ka engine blocks, nnyefe ụlọ, na chassis components. Ọ nwere ike ọ bụghị naanị ibelata ibu nke ụgbọ ala, kamakwa melite arụmọrụ na nchekwa nke ụgbọ ala.
• Ụlọ ọrụ ndị agha: N'ihi arụmọrụ ya zuru oke nke ọma, a na-ejikwa ya na-emepụta ụfọdụ ngwá agha na ngwá agha ndị agha, dị ka ogbunigwe ogbunigwe, egbe egbe na akụkụ ndị ọzọ, nke nwere ike izute ihe dị elu na nke a pụrụ ịdabere na ya nke ngwa agha.
• Nrụpụta akụrụngwa dị elu: Ọ bụkwa ihe dị mkpa n'ịmepụta akụrụngwa akụrụngwa dị elu, dị ka igwe igwe CNC, robots ụlọ ọrụ na akụrụngwa ndị ọzọ. Ọ nwere ike hụ na izi ezi na nkwụsi ike nke akụrụngwa ma melite arụmọrụ akụrụngwa niile.

Nhazi na ọgwụgwọ okpomọkụ

• Nhazi: 2014 aluminum efere nwere ike hazie site na-ekpo ọkụ Rolling, oyi Rolling, forging, extrusion na ndị ọzọ Filiks. A na-ejikarị mpịakọta ọkụ na-emepụta efere ndị buru ibu, ebe ntụgharị oyi nwere ike imeziwanye ogo elu na nha nha nke efere ahụ. Forging na extrusion dabara adaba maka imepụta akụkụ dị mgbagwoju anya.
• Ọgwụgwọ okpomọkụ: Ụzọ ọgwụgwọ okpomọkụ na-emekarị gụnyere ọgwụgwọ ngwọta na ọgwụgwọ ịka nká. Ngwọta ngwọta nwere ike igbari ihe ndị na-emepụta ihe na matrix aluminom iji meziwanye ike na ike nke alloy. Ọgwụgwọ ịka nká nwere ike ime ka ihe ndị na-emepụta ihe na-eme ka ọ pụta ìhè n'ụdị kwesịrị ekwesị iji meziwanye ike na ike nke alloy.