5083 mkpuchi aluminum

5083 mkpuchi aluminom bụ nke Al-Mg usoro alloy. Ọ bụ alloy kachasi ike na-eguzogide corrosion n'etiti alloys bara uru na-anaghị agwọ ọkụ. Ma ọ bụ adabara ịgbado ọkụ owuwu. Ọzọkwa, ọ bara uru ịkọwa na mpempe akwụkwọ aluminom 5083 nwere ezigbo iguzogide mmiri mmiri na njirimara okpomọkụ dị ala. Ya mere, 5083 aluminum mpempe akwụkwọ aghọwo ihe kasị mma nhọrọ maka mmiri-ọkwa aluminum.

N'etiti alloy steeti 5083 aluminium mpempe akwụkwọ, ọtụtụ bụ H111/H112/H116/H321. N'ime ha, ọdịnaya magnesium nke 5083-h116 aluminom mpempe akwụkwọ  dị elu ruru 4.9%, nke bụ alloy nwere nnukwu magnesium. Ọ nwere nnukwu nguzogide corrosion ma nwee ike iguzogide mbuze nke mmiri osimiri. A na-ejikarị ya eme ihe maka akụkụ mmiri nke ụgbọ mmiri.

Njupụta nke 5083-h116 aluminom mpempe akwụkwọ dị ala, naanị 2.66 g/cm³; ike ike nke 5083 alloy dị elu, nke dị elu karịa ụfọdụ obere carbon carbon dị nro, ọ na-adịgide adịgide ma nwee ezigbo nguzogide corrosion; 5083 h116 aluminom mpempe akwụkwọ rụ ọrụ ịgbado ọkụ dịkwa mma nke ukwuu, ọ dịghịkwa mfe ịgbawa na nrọrọ ka emechara ya.

5083-h116 na 5083-H321 aluminum plates nwere nguzogide corrosion ka mma ma dabara adaba maka ebe mmiri dị n'okpuru mmiri nke oke osimiri karịa H111 na H112. Ọ bụ ezie na okpomọkụ nke 5083H116 na H321 aluminum sheets dịtụ iche na mmepụta usoro, nguzogide corrosion dị nnọọ mma karịa iwe ndị ọzọ.

Ojiji nke 5083-h116 mpempe akwụkwọ aluminom maka aluminom mmiri dabere n'ihe atọ.

1. Tụlee ibu arọ.

Efere aluminom mmiri na-ejikarị efere dị mkpa karịa 1.6mm na akwa 5083-h116 aluminom karịa 30mm. Aluminom-magnesium alloys nwere obere njupụta na ịdị arọ dị arọ, nke nwere ike ibelata ibu nke anụ ahụ ma mee ka ikike ibu dị elu.

2. Tụlee site n'akụkụ nke nguzogide corrosion.

5083 h116 aluminum mpempe akwụkwọ bụ nke aluminom-magnesium alloy, nke bụ ihe na-emekarị mgbochi nchara aluminom, nke nwere ike imeghari ka ukwuu corrosive mmiri mmiri gburugburu ruo ogologo oge.

3. Tụlee site n'akụkụ nke nchekwa.

5083-h116 aluminum mpempe akwụkwọ nwere ọkara ike, ezi nhazi arụmọrụ, magburu onwe weldability, ike ọgwụgwụ na-eguzogide, ọ dịghị cracks, na ka nwere ike izute ike na corrosion eguzogide chọrọ mgbe nhazi, nke nwere ike hụ na nchekwa nke ụgbọ mmiri.

Ọkpụrụkpụ: 0.2-350mm

Obosara: 30-2600mm

Ogologo: 200-11000mm

Okuku nne: CC ma ọ bụ DC

Akwụkwọ aluminom | Plate aluminium dị n'ụdị alloys dị iche iche na-enye ụdị weldability, nguzogide corrosion na igwe.

Mpempe akwụkwọ aluminom bụ ọ bụla aluminom mpempe akwụkwọ ọla dị arọ karịa foil mana ọ dị gịrịgịrị karịa 6mm; ọ na-abịa n'ụdị dị iche iche gụnyere efere diamond, gbasaara, gbajiri agbaji na mpempe akwụkwọ aluminom na-ese. Efere aluminom bụ ọla mpempe akwụkwọ aluminom ọ bụla toro oke karịa 6mm

Ogo mpempe akwụkwọ aluminom dị

1000 usoro:1050,1060,1070,1080,1100,1145,1200,1235, wdg.

2000 usoro:2014,2017,2018,2024,2025,2219, 2219,2618a wdg.

Usoro 3000:3003,3004,3102,3104,3105,3005, wdg.

4000 usoro:4032,4043, 4017, wdg

5000 usoro: 5005,5052,5454,5754,5083,5086,5182,5082, wdg.

6000 usoro: 6061,6063,6262,6101, wdg.

Usoro 7000:7072,7075,7003 wdg

8000 usoro: 8011, wdg.