Onye nrụpụta profaịlụ aluminom omenala

RYIWELL MFG bụ onye na-ebute ụzọ na onye nrụpụta nke 6061 6063 aluminom profaịlụ, Aluminom extrusion ngalaba, T oghere Aluminom Profaịlụ, Industrial Aluminom Profaịlụ, T-Oghere Aluminom Profaịlụ, Aluminom Profaịlụ na T oghere Aluminom Profaịlụ.

Dị ka onye isi na-emepụta profaịlụ extrusion aluminom dị elu yana ọpụrụiche. Anyị na-enye profaịlụ aluminom ahaziri ahazi, extrusion aluminom na nnukwu ihe arụrụ arụ. Profaịlụ aluminom dị mma maka ịrụ ọrụ na igwe na ihe ọkụkụ. Uru dị ukwuu bụ ịdị arọ dị ala nke profaịlụ na teknụzụ njikọ na-agbanwe agbanwe.

6061 6063 profaịlụ aluminom na-emepụta RYIWELL MFG sitere na China. Enwere ike ikewa profaịlụ aluminom ka ọ bụrụ 1024, 2011, 6063, 6061, 6082, 7075 na akara ngosi alloy ndị ọzọ nke profaịlụ aluminom, nke usoro 6 kachasị ewu ewu. Ihe dị iche n'etiti ọkwa dị iche iche bụ na nha nke ihe dị iche iche metal dị iche iche, ma e wezụga maka profaịlụ aluminum a na-ejikarị eme ihe maka ọnụ ụzọ na windo Na mgbakwunye na profaịlụ aluminom ụlọ dị ka usoro 60, usoro 70, usoro 80, usoro 90, na mgbidi mgbidi, ọ dịghị ihe dị iche iche nke ihe nlereanya maka profaịlụ aluminum mmepụta ihe, na ọtụtụ ndị na-emepụta ihe na-edozi ha dị ka eserese nke ndị ahịa.

Profaịlụ aluminom nwere ụdị ọgwụgwọ elu ahụ

1. Aluminom anodized
2. Electrophoretic mkpuchi nke aluminom
3. Aluminom kpuchie ntụ ntụ
4. Mkpụrụ osisi na-ebufe aluminum
5. Fluorocarbon fesa aluminum
6. Aluminom na-egbuke egbuke (kewara n'ime polishing mechanical na chemical polishing, n'etiti nke polishing chemical nwere ọnụ ahịa kachasị elu na ọnụahịa kachasị ọnụ)

Profaịlụ aluminom bụ ngwaahịa amụrụ site na aluminom alloys nke na-agbanwe ka ọ bụrụ ihe nwere ọdịdị site na usoro mkpochapụ. Ngwakọta pụrụ iche nke aluminom nke njirimara anụ ahụ na-adaberekarị na usoro a. A na-eji extrusion aluminom mee ihe n'ọtụtụ ebe n'ihi na ígwè a bụ: siri ike ma kwụsie ike.

Ụdị profaịlụ aluminom

1. Oghere oghere.
2. Profaịlụ Square.
3. Profaịlụ Aluminom SD.
4. Profaịlụ RCW.
5. Ngalaba ụzọ.
6. Profaịlụ Louver.
7. T-Ngalaba

Ngwaahịa aluminom mere nke aluminom na ihe ndị ọzọ na-eme ka ọ bụrụ ihe na-edozi ahụ. A na-ahazikarị ya ka ọ bụrụ ihe nkedo, akpụ akpụ, foils, efere, ibe, tubes, mkpara, profaịlụ, wdg, wee hazie ya site na ịgbado oyi, ịkwọ osisi, mkpọpu, ịgbakọta na agba. Isi ihe eji eme ihe bụ aluminom, na-agbakwunye ihe ụfọdụ alloy iji melite arụmọrụ nke aluminom

Uru nke profaịlụ aluminom:

① Ìhè dị arọ

② Njirimara siri ike

③ Omume omume

④ Nguzogide corrosion

⑤ Na-agbanwe agbanwe

1. Ihe: aluminum alloy 6060, 6063, 6005, 6061, 6463, 6082, wdg.

2. Oke obosara nke ngalaba profaịlụ: 450mm

3. Ogologo kachasị ogologo nke profaịlụ extrusion: mita 12

4. Ike: 50,000 tọn kwa afọ na 12 extrusion ahịrị si 600 ruo 3600 tọn.

5. Elu mechaa dị:

(1). Anodizing, gụnyere brushing, machanical and chemical polishing, sand-blasting, matt anodized, alkali anodized, etc.

Agba anodized: Silver, champeenu, ọla kọpa, nwa, ọla edo, ọla edo rose, na-egbu maramara, wdg.

(2). Mkpuchi ike nwere agba dị iche iche, dị ka ọcha, nwa, ọbara ọbara, acha anụnụ anụnụ, isi awọ, odo, wdg.

(3). Emecha osisi.

6. Aluminom machining dị:

(1). Ịcha/ịkwa osisi, gụnyere 45 ogo ịkpụ na elu nkenke;

(2). Ịkụcha ihe, ịkụ aka na igwu mmiri na oke ike tolerances;

(3). Ịkụ ọkpọ;

(4). Deburding.

(5). Ịgbakọta na aghụghọ.

7. Ngwa: Ọnụ ụzọ na windo, ihe ịchọ mma, arịa ụlọ, mgbidi ákwà mgbochi, Rails, Aluminum ladder, Louver, Roller shutter, Roof panel, wdg.

8. OEM n'ichepụta na omenala aluminom profaịlụ.