A1100 Non Stick Round Aluminum Sheet Circles A1050 A1060 Blank Aluminum Fayafai Don Kasuwar Dafa

Mu masu samar da Aluminum Circle, masana'antun diski na aluminium, da masu fitar da da'ira na Aluminum. Muna ba da mafi girman ingancin da'irar ma'aunin nauyi tare da kauri tsakanin 0.3mm - 4mm da diamita tsakanin 3.94 ″ - 38.5, wanda zai dace da bukatun ku don yin girki kamar tukwane, kwanon rufi, fryers da sauransu.

Tare da mu, ɗaya daga cikin manyan masu samar da da'irar Aluminum, ga abin da zaku iya tsammanin matsakaici daga tushen mu a ƙasashen waje:

• Alloy: 1050, 1060, 1070, 1100, 3002, 3003, 3004, 5052A, 5052, 5754, 6061
• Taurin: O, H12, H14, H16, H18
• Kauri: 0.012 ″ - 0.15 ″ (0.3mm – 4mm)
• Diamita: 3.94″ – 38.5″ (100mm-980mm)
• Surface: goge, mai haske, Anodized
• Amfani: Ya dace don yin tukwane, kwanon rufi, tiren pizza, kwanon kek, kwanon burodi, murfi, kettles, kwano, fryers, haske mai haske.
• Stamping: Kayan aiki sun haɗa da: karfe, galvanized karfe, aluminum, aluminum gami da sauran karafa

Mene ne bambanci tsakanin sanyi birgima aluminum takardar da zafi birgima?

Idan aka kwatanta da mirgina mai zafi, babban fasalin jujjuyawar sanyi shine cewa za'a iya samun ƙananan zanen gado da tsiri.

Yawanci, kauri na zafi birgima takardar ne 6-8 mm. Matsakaicin kauri shine 2.5mm-3.0mm. Saboda girman yawan zafin jiki a cikin tsarin jujjuyawar zafi, yana da wahala a ci gaba da jujjuyawa zuwa kauri mai kauri, yayin da juzu'in sanyi na iya ci gaba da ɓata kayan mirgina cikin sauƙi.

Yawancin lokaci, injin mirgina sanyi na iya mirgine zuwa 0.5-4.5 mm. Babban injin mirgina sanyi na iya mirgina sirara ko kauri mai kauri tare da kauri na 0.1-0.2 mm. Cold mirgina iya samar da samfurori tare da madaidaicin girma, uniform kauri, mai kyau santsi da surface mai sheki, mai kyau tsarin Properties da high quality surface.

Akwai manyan bambance-bambance guda hudu tsakanin takardar aluminum mai zafi da sanyi:

1. Amfani daban-daban: Ana amfani da zanen gadon alumini mai sanyi mai sanyi don gyare-gyare, kuma zanen gadon alumini masu zafi sun dace da tambari da zane.

2. Ayyuka daban-daban: farantin aluminum mai zafi mai zafi yana da kyakkyawan yanayin inganci, kayan aikin injiniya mai ƙarfi da ductility, da sakamako mai kyau na iskar shaka. A lokaci guda, faifan aluminum da aka sarrafa gabaɗaya ana sarrafa shi daga farantin aluminium, wanda a zahiri kuma yana shafar aikin farantin aluminum;

3. Samar da albarkatun kasa ya bambanta: bambanci tsakanin su biyu shine samar da billet. Billet ɗin masu zafi ana jefa su a tsaye cikin billet-mai zafi-ana birgima su cikin coils don jujjuyawar sanyi, yayin da ƙwanƙolin sanyin jujjuyawar coils-cigaba da yin simintin gyare-gyare. mirgina;

4. Tsarin samarwa ya bambanta: ana yin amfani da na'ura mai sanyi ta hanyar simintin gyare-gyare a cikin simintin simintin gyare-gyare (kauri 8mm) kuma ana sarrafa shi ta hanyar na'ura mai sanyi, yayin da zafi mai zafi yana zafi da ingot na aluminum (kauri 400-500mm), wanda aka yi zafi da zafi mai zafi. Mirgine da injin mirgina mai zafi;

Da'irar faifan aluminium an yi ta ne daga ɗanyen abu mai inganci wanda ke tabbatar da tsayin daka ga masu amfani wanda shine dalilin da ya sa faifan da mu ke bayarwa yana da matuƙar buƙatar yin kayayyakin girki. Mu, a matsayinmu na ɗaya daga cikin manyan masu samar da da'irar aluminium, muna ci gaba da ƙoƙarin samar da ingantattun samfuran aluminium ga abokan ciniki.

Ana amfani da fayafai na alluminum don samar da kayan dafa abinci, kayan aiki, kwanon pizza, mai dafa abinci, bakeware, alamar hanya, alamar zirga-zirga, da sauransu.

Tunda shine 99.5% tsantsar aluminum, ba shi da matsala ko matsalar kwasfa na lemu lokacin da kake jujjuya ko zane mai zurfi.  Za mu iya samar da fayafai na CC da DC aluminum

Mai siyar da fayafai na aluminium na kasar Sin RAIWELL MFG / RUIYI yana sarrafawa sosai da gwada gami, fushi da aikin coil na aluminium don tabbatar da daidaito da bambancin da'irar aluminium da aka samar. Ayyukan fayafai na fayafai na aluminium yana da kyau, kuma an tabbatar da cewa babu fayyace tazara, tabo mai, oxidation, spots baki, da dai sauransu Lokacin da kauri daga fayafai na da'irar aluminum ya fi 1.0 mm, gefuna na ƙãre samfurin aluminium da'irar an tabbatar da su zama m kuma free of burrs. Gabatarwar kayan aikin haɓakawa da ingantaccen kayan aikin haɓaka haɓaka haɓakar diski na aluminium da ƙimar amfani da kayan aiki, yana rage tasirin samarwa yadda ya kamata, kuma yana ba abokan ciniki sauƙi na lokaci-lokaci.