Yanayin lalata juriya 1350 Mill gama aluminum farantin takardar factory
EN AW1350 aluminum gami da ba za a iya magance zafi ba. Ya ƙunshi mafi ƙarancin 99.5% aluminum. Aikin sanyi yana ƙara ƙarfinsa. Yawancin lokaci ana amfani da shi don haɓakar lantarki. Aluminum Alloy 1350 yana da girma (99.5% min.) Abubuwan da ke cikin aluminum tare da ƙananan ƙari na silicon, baƙin ƙarfe, jan karfe, manganese, da sauran abubuwa. Alloy 1350 yana aiki sosai kuma yana da kyakkyawan tsari, wanda ke haifar da amfani da shi a cikin kayan lantarki da sauran aikace-aikace. Ana amfani da Alloy 1350 da farko a cikin kera na'urorin lantarki, kuma -H111 fushi yana nuna mafi girman ƙarfin wutar lantarki na duk ma'auni na aluminum da aka cire, haɗuwa ko wuce 61.0% IACS. Aluminum 1350A (99.5% Al min) yana da kyakkyawan tsari da juriya na lalata kuma shine zaɓi na zaɓi don masu gudanar da lantarki 13 50 o takardar coil na aluminium mai tsaftataccen kasuwanci ne, mai ƙarfi sosai a cikin yanayin extruded. Yana da kyakyawan juriya ga lalata da ingantaccen ƙarfin lantarki. gyare-gyaren gyare-gyare, danniya mai sauƙi da na ado taro a gine-gine da sufuri, sunadarai, abinci da kayan aiki, masu musayar zafi.
Dubawa
Aluminum alloys 1050 da 1350 suna da bambanci guda ɗaya a cikin inda sinadarin sinadaran 1050 yana da ɗan ƙaramin max akan abun ciki na silicon fiye da 1350. Yana da ɗan ƙaramin bambanci kuma duka suna nan a matsayin matsakaicin ƙimar, amma ƙaramin bambanci zai iya shafar aikace-aikace masu mahimmanci.
Zazzabi: F, O, H12, H14, H16, H18, H19, H22, H24, H26, H28, H111, H112, H114
Kauri: 0.2-350mm
Cikakkun Fassara da Ƙayyadaddun Bayanai
Bayanin fasaha da teburi an kiyaye su daga ainihin rikodin samfurin aluminum.
Aluminum alloys 1050 da 1350 suna da bambanci guda ɗaya a cikin inda sinadarin sinadaran 1050 yana da ɗan ƙaramin max akan abun ciki na silicon fiye da 1350. Yana da ɗan ƙaramin bambanci kuma duka suna nan a matsayin matsakaicin ƙimar, amma ƙaramin bambanci zai iya shafar aikace-aikace masu mahimmanci.
Zazzabi: F, O, H12, H14, H16, H18, H19, H22, H24, H26, H28, H111, H112, H114
Kauri: 0.2-350mm
Nisa: 30-2600mm
Tsawon: 200-11000mm
Uwar nada: CC ko DC
Nauyi: Kimanin 2mt kowane pallet don girman gabaɗaya
MOQ: 5-10ton kowane girman
Kariya: takarda inter Layer, farin fim, fim mai shuɗi, fim mai launin fari, fim ɗin ƙarami, gwargwadon buƙatunku.
Sama: mai tsafta kuma mai santsi, ba tabo mai haske, lalata, mai, ramuka, da sauransu.
Daidaitaccen samfur: GBT3880, JIS4000, EN485, ASTM-B209, EN573
Lokacin isarwa: kimanin kwanaki 30 bayan an karɓi ajiya
Biya: T/T, L/C a gani
Sharuɗɗan ciniki: FOB, CIF, CFR
1350 aluminum alloy sheet ana amfani da a a amma manyan amfaninsa sune da’irar wutar lantarki , fil, sanda, da rivets.
| Iyakar Haɗin Sinadari | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nauyi% | Si | Fe | Ku | Mn | Mg | Cr | Zn | B | Ga | V+T | Cr+Mn+Ti+V | Wasu |
| 1350 | 0.1 | 0.40 | 0.05 | 0.01 | – | 0.01 | 0.05 | 0.05 | 0.03 | 0.02 | – | 0.03 (kowane) 0.10 (jimlar) |
| 1350A Jamus | 0.25 | 0.40 | 0.02 | – | 0.05 | – | 0.05 | – | – | – | 0.03 | 0.03 (kowane) |
| Kayan abu | Haushi | Ƙarfin Tensile (N/mm²) | Girma a cikin 50mm |
| 1350 Bar | M | 60 min | 23 |
| 1350 Bar | H2 | 85 (minti) | 13 |
Hotunan Samfur
