Fabrication panels
Sheet for bending, welding and general fabrication work.
Flat rolled
Aluminum Sheet
Mill-finish and application-led aluminum sheet for fabrication, transport, marine and general engineering.
Flat Rolled Products
Choose sheet where forming, flatness and surface condition need to be considered together.
Confirm alloy, temper, dimensions, finish, processing and packing so the quotation matches the aluminum product you plan to buy.
- 01Start from product formTell us whether you need sheet, coil, circle, tread plate, perforated plate, grating, profile, bar or access cover.
- 02Define processing detailsShare drawing, forming, machining, welding, slitting, perforation or installation requirements.
- 03Protect the delivered productState surface, visible side, packing, traceability and inspection needs before quotation.
Featured Forms
Products in Aluminum Sheet
90 original product records are available in this category. Showing 1-9.
Flat rolled
High Strength 5005 Aluminum Plate Aluminium Alloy Sheet 2mm 3mm 4mm For Architecture
High strength 5005 Aluminium Plate Alloy 2mm 3mm 4mm for Architectural applications 5005 aluminium alloy plate is an aluminium alloy with good resistance to atmospheric corrosion. It is used in decorative and architectural applications. It is a member of the 5000 series of aluminum-magnesium wrought alloys. As such, it is not used in casting. It can attain moderate to high strength by cold working, and has relatively high welded strength compared to other aluminum alloy families. Tempers H116 and H321 can be used in fresh and salt water
View product details
Flat rolled
Good Formability 3003 H22 H14 5052 Aluminium Metal Plates 1100 Flat Aluminum Sheet Plate
3003 Aluminum Sheet Features ♦ Alloy: 3003 ♦ Temper: H14, H16, H18, H22, H24, H26, O ♦ Thickness(mm):0.25-10 ♦ Width(mm):800-2200 ♦ This series aluminum sheet is anticorrosive and its production technology is good. ♦ The main ingredient in it is manganese element and the content is between 1.0% and 1.5%. 3000 Aluminum Sheet Applications As a result of its good property in anti-corrosion, this series aluminum sheet is commonly used in moist environments like air conditioners, refrigerators, at the bottom of cars, etc. 3000 series aluminum sheet is approx 20% stronger than the 1000 series, has great workability and may be deep drawn, spun, welded or brazed. The 3000series aluminum sheet is widely used for general purposes. The Alloy are including the AA3003, AA3004, AA3005, AA3102, AA3105, Temper O, H14, H18, H24, H26, H111, H112, F, From thickness 0.2mm-350mm, width 500mm-2300mm, length 500mm-110000mm. With Plain, five bar, stucco, diamond, or mirror surface process, Or coated with PE, PVDF, BRUSH etc. There is (CC) cold rolling and (DC) hot rolling Line. 3003 Aluminum Sheet Approx. 20% higher strength than the 1100 series, but retaining an excellent workability rating. May show some slight discoloration when anodized, but reacts well to mechanical and organic finishings. 3003 is easily welded and brazed, but solder is limited to the torch method. Like 1100, tends to be “gummy” when machined. Non-heat treatable.Typical applications include food and chemical equipment, appliance components, truck and trailer roofing, heat exchangers, and lawn furniture components
View product details
Flat rolled
EN AW5454 Aluminum Plate
5454 aluminum plate is widely used in ships, marine engineering, oil tankers, pressure vessels, automobile bodies and other fields. Its high strength and excellent corrosion resistance make it an ideal material for manufacturing ship structures, oil tank vehicle fuel tanks, chemical equipment containers and other components.
View product details
Flat rolled
EN AW-1080A aluminum sheet plate Aircraft materials
Aluminium 1080A, with the European designation EN AW-1080A is a ‘commercially pure’ alloy, minimum 99.8% Al, available as round bar or wire For the 1080 industrial pure aluminum, with high plasticity, corrosion resistance, electrical conductivity and thermal conductivity, but low strength, heat treatment can’t strengthen cutting; welding, atomic hydrogen welding and contact welding, brazing; bear various pressure processing and extension, bending. Temper: F, O, H12, H14, H16, H18, H19, H22, H24, H26, H28, H111, H112, H114 Thickness:0.2-350mm Width:30-2600mm Length:200-11000mm Mother coil: CC or DC Weight: About 2mt per pallet for general size MOQ: 5-10ton per size Protection: paper inter layer, white film, blue film, black-white film, micro bound film, according to your requirement. Surface: clean and smooth, no bright speck, corrosion, oil, slotted, etc. Standard product: GBT3880, JIS4000, EN485, ASTM-B209, EN573 Delivery time: about 30days after receiving the deposit Payment: T/T, L/C at sight Trading terms: FOB, CIF, CFR
View product details
Flat rolled
Customized 6061 6101 Alloy Aluminium Sheet for Vehicles Molds Parts
6061 aluminum alloy is a high-quality aluminum alloy product produced by heat treatment and pre-stretching process. Although its strength cannot be compared with 2XXX series or 7XXX series, its magnesium and silicon alloys have many characteristics, excellent processing performance and excellent welding characteristics. And electroplating, good corrosion resistance, high toughness and no deformation after processing, dense material without defects and easy to polish, easy to color film, excellent oxidation effect and other excellent characteristics. The main alloying elements of 6061 aluminum alloy are magnesium and silicon, and form Mg2Si. If it contains a certain amount of manganese and chromium, it can neutralize the bad effects of iron; sometimes a small amount of copper or zinc is added to improve the strength of the alloy without significantly reducing its corrosion resistance; there is still a small amount of conductive material. copper to offset the adverse effects of titanium and iron on electrical conductivity; zirconium or titanium can refine grains and control recrystallization; in order to improve machinability, lead and bismuth can be added. Mg2Si is solid-dissolved in aluminum, which makes the alloy have artificial aging hardening function. The main alloying elements in 6061 aluminum alloy are magnesium and silicon, which have medium strength, good corrosion resistance, weldability, and good oxidation effect.
View product details
Flat rolled
custom Rectangular busbar square angle EN AW 1350 aluminum Flat bus bar
custom Rectangular busbar square angle EN AW 1350 aluminum Flat bus bar Pure aluminum has a conductivity of about 65 percent of the International Annealed Copper Standard (lACS). Aluminum can be produced 99.99 percent pure; however, this purity is costly to achieve and the mechanical properties are low. Aluminum 1350 is a commercial high-purity aluminum with 61 percent conductivity. The tensile strength of each 1350 temper is determined by the amount of work given the metal during fabrication. Today, most 1350 aluminum bus conductors are of -Hlli temper for extrusions, -H112 for sawed rolled plate, and -F for cast bars. The designations 1350-F and 1050 are often used in the trade for designating cast bus bars made by run-out into sand molds,or continuous run-out through an orifice.
View product detailsMaterial Range
Available product options for Aluminum Sheet.
Choose the product form, finish and delivery format that fits your application.
Product options
Product formSheet, cut blank and sheared panel
Typical requestAlloy, temper, thickness, width and length
Selection focusFormability, corrosion environment, strength and surface
DocumentsMill test certificate and inspection requirements on request
Fabrication Applications
Common ways Aluminum Sheet enters a finished project.
Use these examples to describe the product use. The final alloy, size and supply details depend on dimensions, operation and exposure conditions.
Transport components
Flat rolled aluminum selected around weight, forming and joining needs.
Marine fittings
Corrosion-aware sheet selection for equipment and non-critical structures.
Supply Support
From product selection to delivered aluminum.
Cut-to-size supply
Include finished dimensions, quantity, tolerance and whether a drawing governs the requirement. The right supply format depends on the product form and next processing step.
Alloy and temper matching
Start with the environment and operation: corrosion exposure, forming, machining, joining, load and appearance. Then the correct aluminum category, alloy and temper can be quoted.
Quality documentation
State certificate, inspection, traceability or export-document needs in the RFQ so they can be checked with the commercial and technical scope.
Surface protection and packing
For coated, anodized, patterned or exposed material, include visible-side and handling expectations. Protective film and packing are part of the product brief.
Related categories
Continue by aluminum product form or application need.
These links keep product selection inside the expanded aluminum range instead of sending every request back to a broad overview page.
Aluminum Sheet
Request QuoteReady to define the aluminum product and delivery details?
Send product category, application, alloy/temper preference, dimensions, quantity, drawing and document requirement.